Maccaferri Gabions Inc. Environmental Solutions For Soil Erosion Control

Gabion Mats

Often situations arise in bank, channel, and shore protection where a 12" or 18" flexible revetment is needed. In many cases t his protection can cover a broad surface area, and the use of individual box gabions, while effective, may require extensive connection time. To meet such requirements, Maccaferri has introduced the Gabion Mat

The Gabion Mat is a rectangular container made of heavily galvanized steel wire woven in a double-twist, hexagonal mesh pattern. It is supplied in roll of 100' long by 6' or 9' wide. The Gabion Mat saves installation time when compared to traditional gabion units.

As an alternative to "rip-rap" and other semi-rigid structures, Gabion Mats provide:

  • A monolithic structure as a cost-effective alternative to "rip-rap"
  • A strong structure able to withstand the hydro-dynamic drag and lift forces.
  • A flexible structure able to settle and deform without failure and loss of efficiency.
  • A structure without the surface irregularities which often cause "rip-rap" failure.
  • A structure that does not need costly preparation of the base material.
  • A structure that covers a larger area than traditional gabions.
GABION MATS (8 x 10 mesh type)
MESH WIRE DIAMETER: Galvanized or Galmac nominal diam. 3.05mm(0.120")
Galvanized and PVC nominal internal diam. 2.7mm(0.106"), nominal external 3.7mm (0.146").
Length
(ft.)
Width
(ft.)
Height
(ft.)
Number
of Cells
Capacity
(cy)
99' 6' 1' 22.00 22.00
99' 9' 1' 33.00 33.00
99' 6' 1.5' 22.00 33.00
99' 9' 1.5' 33.00 49.50
Standard cells are 3' x 9'. Additional diaphragms are available to obtain different cell sizes as specified by the project engineer. Available in Zinc coated, Galmac coated and Zinc + PVC coated wire.
NOTE: All sizes and dimensions are nominal.